Simulation output
The output report is a voluminous text file that gives details on the simulation according to the report parameters that were specified in the input.
Production data
By default, the tNavigator™ simulator produces no production data. Variables that specify what data is to be reported are available on the SUMMARY tab in the General Settings view. Select the Add Standard Reporting option from the context menu of the General Settings view to specify a default set of variables for reporting. This default set is enumerated below:
FOPR Field oil production rate
FPR Field pressure
WOPR Well oil production rate
WWPR Well water production rate
WGPR Well gas production rate
WWCT Well water cut
WGOR Well gas/oil ratio
WBHP Well bottom hole pressure
WTHP Well tubing head pressure
WWIR Well water injection rate
FOPT Field oil production total
WOPT Well oil production total
FGPR Field gas production rate
FGIR Field gas injection rate
WGIR Well gas injection rate
FGPT Field gas production total
FGIT Field gas injection total
WGPT Well gas production total
WGIT Well gas injection total
FWPR Field water production rate
FWIR Field water injection rate
FWPT Field water production total
FWIT Field water injection total
WWPT Well water production total
WWIT Well water injection total
Click Import Results on the Simulation strip to import plots from simulations that have not been run in the application.
Map data
By default, the tNavagator™ simulator produces no map data. Map data generation must be setup in the input (General Settings view, Maps tab). Use Add Standard Reporting option from the context menu of the General Settings view to set up a typical map generation for the deck which includes PRES, SOIL, SGAS, and SWAT maps.
The map data is written as a set of files. This file set differs depending on which options have been selected in the I/O options section of the Options tab of the General Settings view. Map data is imported after the simulation is complete. Use the Import Results form to import data from simulations that have not been performed using the application.
Maps will not be imported if no grid is attached to the simulation case.